罗德与施瓦茨 R&S RTE1104 数字示波器。

用途：适用于嵌入式设计开发、常规调试等任务，可对各类信号进行测量分析。

技术原理：通过模数转换将模拟信号转换为数字信号，利用数字信号处理技术对信号进行处理和分析，采用单芯 A/D 转换器提升性能。

性能：具备 4 个通道，带宽达 1GHz。每通道采样率为 5GSa/s，内存深度为 50MSa / 每通道（单通道时最大 200MSa），垂直分辨率最高 16 位。拥有超 100 万次 / 秒的波形捕获率，能快速定位信号故障。极低噪声前端结合高清模式下 16 位垂直分辨率，确保结果精准。数字触发系统抖动极小，可实时对细微信号细节触发。还支持复杂分析的专用应用解决方案，通过 10.4 英寸 XGA 触摸屏操作便捷。

Product Name: Rohde & Schwarz R&S RTE1104 Digital Oscilloscope.

Purpose: It is suitable for tasks such as embedded design development and general debugging, and can measure and analyze various signals.

Technical Principle: It converts analog signals into digital signals through analog - to - digital conversion, and uses digital signal processing technology to process and analyze signals. A single - core A/D converter is used to improve performance.

Performance: It has 4 channels with a bandwidth of 1GHz. The sampling rate per channel is 5GSa/s, and the memory depth is 50MSa per channel (up to 200MSa for a single channel). The vertical resolution is up to 16 bits. It has a waveform capture rate of over 1 million times per second, which can quickly locate signal faults. The extremely low - noise front - end combined with 16 - bit vertical resolution in high - definition mode ensures accurate results. The digital trigger system has extremely low jitter and can trigger on the smallest signal details in real - time. It also supports dedicated application solutions for complex analyses and is easy to operate through a 10.4 - inch XGA touchscreen.