GYROTEC KIC - 1A 测温仪用途：专为高度受限制的烧结炉炉膛设计，可用于监测标准晶片烧结过程中的温度。同时，也适用于其他太阳能相关应用领域，能有效保障生产过程中的温度监控需求。性能：硬件和隔热套设计能有效保护设备，在单次标准晶片烧结过程中，设备内部温度升高不超过 10 度，可重复使用，仅需短暂冷却。每秒可提供 20 个精确测温读数，利于精准把握烧结工艺曲线峰值区。采用 4 通道，配备标准 K 型热电偶连接器，由标准 AAA 电池供电，电池安装区易接近，方便快速更换电池。基于图形界面的软件，可自动化完成诸多传统温度曲线测量工作，还能即时分析曲线数据，并对烧结炉设置改变后的晶片温度曲线预期变化进行预测，减少工程师调试时间。

Product Name: GYROTEC KIC - 1A Temperature Measuring InstrumentPurpose: It is specially designed for the highly restricted furnace chamber of sintering furnaces and can be used to monitor the temperature during the standard wafer sintering process. At the same time, it is also suitable for other solar - related application fields, effectively ensuring the temperature monitoring needs during the production process.Performance: The hardware and heat - insulating sleeve design can effectively protect the equipment. During a single standard wafer sintering process, the internal temperature of the equipment rises by no more than 10 degrees. It can be reused and only requires a short cooling period. It can provide 20 accurate temperature measurement readings per second, which is beneficial for accurately grasping the peak area of the sintering process curve. It adopts a 4 - channel design, is equipped with a standard K - type thermocouple connector, and is powered by standard AAA batteries. The battery installation area is easily accessible, facilitating quick battery replacement. The software based on a graphical interface can automate many traditional temperature curve measurement tasks, instantly analyze curve data, and predict the expected changes in the wafer temperature curve after changes in the sintering furnace settings, reducing the debugging time required by engineers.