诺信 NORDSON XD 7500 X 射线检测系统用途：适用于电子制造领域，特别是印刷电路板（PCB）组件及半导体元件检测。能精准检测焊点缺陷，如虚焊、短路等；识别元件内部结构异常、位置偏移等问题，助力提升产品质量与生产效率。技术原理：通过发射 X 射线穿透被检测物体，因不同材料对 X 射线吸收程度不同，致使透过物体的 X 射线强度分布有差异。探测器接收 X 射线并转化为电信号，经处理生成图像，以此分析物体内部状况，实现无损检测。性能：配备 Nordson DAGE 开放、透射式 X 光管，最高 160KV 管电压、3W 标靶功率时，特征分辨率＜0.95μm 。采用 133 万像素、10 帧 / 秒的 CMOS 平板探测器，有实时影像增强功能且使用寿命长。几何放大倍率达 1400 倍，系统放大倍率 4200 倍。最大样品检测尺寸为 29”x 22.8”（736 x 580 mm） 。在保持放大倍率不变的情况下，最大可达到 65 度倾斜角检测，能 360 度旋转检测测试点。操作简便，通过软件点击即可完成，无需编程技巧 。
Product Name: Nordson NORDSON XD 7500 X - ray Inspection SystemUsage: It is applicable to the electronics manufacturing field, especially for the inspection of printed circuit board (PCB) components and semiconductor elements. It can accurately detect solder joint defects such as cold solder joints and short circuits, and identify abnormal internal structures and position deviations of components, helping to improve product quality and production efficiency.Technical Principle: By emitting X - rays to penetrate the object to be inspected, due to the different absorption degrees of X - rays by different materials, the intensity distribution of X - rays passing through the object varies. The detector receives the X - rays and converts them into electrical signals, which are then processed to generate an image, so as to analyze the internal condition of the object and achieve non - destructive testing.Performance: Equipped with Nordson DAGE open, transmissive X - ray tube, with a feature resolution of < 0.95μm at a maximum tube voltage of 160 KV and a target power of 3W. It uses a 1.33 - megapixel, 10 - frame - per - second CMOS flat - panel detector with real - time image enhancement function and long service life. The geometric magnification is 1400 times, and the system magnification is 4200 times. The maximum sample detection size is 29”x 22.8” (736 x 580 mm). While maintaining the magnification, the maximum tilt angle for detection can reach 65 degrees, and it can perform 360 - degree rotation detection of test points. It is easy to operate and can be completed by clicking on the software without programming skills.