菲尼克斯 PHOENIX PCBA Inspector 100用途：主要用于电路板组件（PCBA）的焊点检测，在电子制造、质量控制、产品研发等领域发挥重要作用，可高效检测 PCBA 焊点的虚焊、短路、开路等缺陷。技术原理：属于高分辨率微焦点 X 射线检查系统。利用 X 射线穿透 PCBA 样品，不同材质对 X 射线吸收程度不同，探测器接收透过样品的 X 射线信号并转化为图像，通过分析图像判断焊点等部位是否存在缺陷。性能：最大管电压 100kV，最大功率 10W；具备高分辨率，细节检测能力可达 3um；最小焦物距 4.5mm；几何放大倍率（2D）高达 75 倍，能清晰呈现微小部位的状况，助力精准检测 。

Product Name: Phoenix PCBA Inspector 100Purpose: Mainly used for the inspection of solder joints in printed circuit board assemblies (PCBA). It plays an important role in fields such as electronic manufacturing, quality control, and product R & D, and can efficiently detect defects such as poor soldering, short circuits, and open circuits in PCBA solder joints.Technical Principle: It belongs to a high - resolution microfocus X - ray inspection system. X - rays are used to penetrate the PCBA sample. Different materials have different degrees of absorption of X - rays. The detector receives the X - ray signals passing through the sample and converts them into images. By analyzing the images, it can be determined whether there are defects in parts such as solder joints.Performance: The maximum tube voltage is 100 kV, and the maximum power is 10 W. It has a high resolution with a detail detection capability of up to 3 um. The minimum focal - object distance is 4.5 mm. The geometric magnification ratio (2D) is as high as 75 times, which can clearly show the conditions of tiny parts and facilitate accurate detection.