菲尼克斯 PHOENIX PCBA Analyser 160用途：是一款用于电路板组件（PCBA）检测的设备，在电子制造、质量控制以及产品研发等领域应用广泛，可精准检测 PCBA 中的焊点缺陷、元件内部结构问题等。技术原理：采用微焦点 X 射线技术，X 射线穿透 PCBA 样品，不同材质对 X 射线吸收程度不同，探测器捕捉透射后的 X 射线信号并转化为图像，通过分析图像来判断 PCBA 是否存在诸如虚焊、短路、开路等缺陷。性能：配备 160kV 高能量 X 射线源，能提供较强的穿透能力，可检测较厚或材质复杂的 PCBA；具备高分辨率成像能力，细节检测能力可达微米级，例如部分型号能清晰分辨 2μm 及更小的缺陷；拥有大尺寸样品台，可容纳较大尺寸的 PCBA；部分机型几何放大倍率（2D）高达 75 倍以上，助力精准检测微小部位 。

Product Name: Phoenix PCBA Analyser 160Purpose: It is a device used for the inspection of printed circuit board assemblies (PCBA). It is widely applied in fields such as electronics manufacturing, quality control, and product R & D. It can accurately detect solder joint defects, internal structure problems of components, etc. in PCBA.Technical Principle: It adopts microfocus X - ray technology. X - rays penetrate the PCBA sample. Different materials have different degrees of absorption of X - rays. The detector captures the transmitted X - ray signals and converts them into images. By analyzing the images, it can be determined whether there are defects such as poor soldering, short circuits, and open circuits in the PCBA.Performance: Equipped with a 160 kV high - energy X - ray source, it can provide strong penetration, enabling the inspection of thicker or more complex - material PCBA. It has high - resolution imaging capabilities, with a detail detection ability reaching the micron level. For example, some models can clearly distinguish defects of 2 μm and smaller. It has a large - size sample stage that can accommodate larger - sized PCBA. The geometric magnification ratio (2D) of some models is as high as over 75 times, facilitating the accurate detection of tiny parts.