马尔文 PANALYTICAL Xpert Pro MPD用途：可进行物相定性定量分析、点阵参数测定，适用于材料研究、薄膜分析、晶体结构研究等领域，能对干法分离技术中钍铀氟盐的高温电解产物、氟盐高温水解产物进行物相分析。技术原理：属于 X 射线粉末衍射仪，由 X 射线发生器（X 光管）、测角仪、探测器及计算机系统组成。X 光管发射 X 射线，测角仪控制 X 射线与样品及探测器的相对位置，探测器接收衍射信号并转化为电信号供计算机分析。性能：X 光管为 Cu 靶，最大电压 60kV，最大电流 55mA，最大输出功率 3kW；测角仪为样品水平放置型，2θ 角度范围 1° - 160°，测试中样品位置不变，X 光管和探测器绕样品相对转动，角度重现性 ±0.0001°（空载）；PIXcel 探测器接收效率、灵敏度、稳定性高；配备相应软件及 PDF - 2 国际粉末衍射数据库 。

Product Name: Malvern PANalytical Xpert Pro MPDPurpose: It can perform qualitative and quantitative phase analysis and lattice parameter determination. It is suitable for fields such as materials research, thin - film analysis, and crystal structure research. It can analyze the phase of the high - temperature electrolysis products of thorium - uranium fluorides and the high - temperature hydrolysis products of fluorides in the dry - separation technology.Technical Principle: It belongs to an X - ray powder diffractometer, consisting of an X - ray generator (X - ray tube), a goniometer, a detector, and a computer system. The X - ray tube emits X - rays, the goniometer controls the relative positions of the X - rays, the sample, and the detector, and the detector receives the diffracted signals and converts them into electrical signals for computer analysis.Performance: The X - ray tube is a Cu target with a maximum voltage of 60 kV, a maximum current of 55 mA, and a maximum output power of 3 kW. The goniometer is of the horizontal sample - placement type, with a 2θ angular range of 1° - 160°. During the test, the sample position remains unchanged, and the X - ray tube and the detector rotate relative to the sample. The angular reproducibility is ±0.0001° (unloaded). The PIXcel detector has high reception efficiency, sensitivity, and stability. It is equipped with corresponding software and the PDF - 2 international powder diffraction database.