MICROPIONEER XRF - 2000H用途：用于材料的涂层 / 镀层厚度、材料组成和贵金属含量检测，可测量各类金属层、合金层厚度，也能对电镀液进行分析，适用于电子电镀、五金电镀、LED 支架、端子连接器、半导体等行业。技术原理：物质经 X 射线照射后，从不稳定状态回到稳定状态时会释放荧光。该仪器通过测量释放荧光的能量及强度，进行定性和定量分析，以确定镀层厚度及成分。性能：可测量高达六层的镀层（五层厚度 + 底材），并同时分析多种元素。能检测的元素范围为 Ti (22)~U (92) 。测量范围：原子序 22 - 25，0.1 - 0.8μm；26 - 40，0.05 - 35μm；43 - 52，0.1 - 100μm。X 射线管油冷、超微细对焦，高压 0 - 50KV（程控）。测量小面积为直径 0.2mm 圆面积，测量仅需 10 - 30 秒。

Product Name: MICROPIONEER XRF - 2000HPurpose: It is used for the detection of coating/plating thickness, material composition and precious metal content of materials. It can measure the thickness of various metal layers and alloy layers, and also analyze electroplating solutions. It is suitable for industries such as electronic electroplating, hardware electroplating, LED brackets, terminal connectors and semiconductors.Technical Principle: When a substance is irradiated by X - rays, it will release fluorescence when returning from an unstable state to a stable state. The instrument conducts qualitative and quantitative analysis by measuring the energy and intensity of the released fluorescence to determine the plating thickness and composition.Performance: It can measure up to six - layer coatings (five - layer thickness + substrate) and analyze multiple elements simultaneously. The detectable element range is Ti(22)~U(92). Measurement range: for atomic number 22 - 25, 0.1 - 0.8μm; 26 - 40, 0.05 - 35μm; 43 - 52, 0.1 - 100μm. The X - ray tube is oil - cooled with ultra - fine focusing, and the high voltage is 0 - 50KV (programmable control). The minimum measurable area is a circular area with a diameter of 0.2mm, and the measurement only takes 10 - 30 seconds.