菲尼克斯 PHOENIX PCBA Inspector用途：用于电路板组件（PCBA）的质量检测，可精准检测焊点虚焊、短路、开路等制造缺陷，广泛应用于电子制造、质量管控和产品研发等领域。技术原理：属于高分辨率微焦点 X 射线检查系统。借助 X 射线穿透 PCBA 样品，不同材质对 X 射线吸收程度有差异，探测器接收透过样品的 X 射线信号，并转化为图像，经分析图像来判断焊点等部位有无缺陷。性能：如 PCBA Inspector 100，最大管电压 100kV，最大功率 10W；细节检测能力可达 3μm；最小焦物距 4.5mm；几何放大倍率（2D）高达 75 倍 。部分型号可实现细节分辨率小于 2μm，具备高品质数字化影像系统。

Product Name: Phoenix PCBA InspectorPurpose: Used for the quality inspection of printed circuit board assemblies (PCBA). It can accurately detect manufacturing defects such as poor soldering, short circuits, and open circuits in solder joints, and is widely applied in fields like electronics manufacturing, quality control, and product R & D.Technical Principle: It belongs to a high - resolution microfocus X - ray inspection system. By using X - rays to penetrate the PCBA sample, different materials have different degrees of absorption of X - rays. The detector receives the X - ray signals passing through the sample and converts them into images. By analyzing the images, it can be determined whether there are defects in parts such as solder joints.Performance: For example, the PCBA Inspector 100 has a maximum tube voltage of 100 kV, a maximum power of 10 W, a detail detection capability of up to 3 μm, a minimum focal - object distance of 4.5 mm, and a geometric magnification ratio (2D) of up to 75 times. Some models can achieve a detail resolution of less than 2 μm and are equipped with a high - quality digital imaging system.