诺信 NORDSON XD7500 - 1 X 射线检测系统用途：主要用于电子制造领域，对印刷电路板（PCB）组件、电子元器件进行无损检测。可精准检测焊点缺陷（如虚焊、短路、断路）、元件内部结构异常、位置偏移等问题，助力提升产品质量与生产效率。技术原理：系统发射 X 射线穿透被检测物体，因不同材料对 X 射线吸收程度不同，致使透过物体的 X 射线强度分布存在差异。探测器接收这些 X 射线，并将其转化为电信号，经处理生成图像，通过分析图像来识别产品是否存在缺陷与异常。性能：配备 Nordson DAGE 开放、透射式 X 光管，在最高 160KV 管电压、3W 标靶功率时，特征分辨率＜0.95μm。采用 133 万像素、10 帧 / 秒的 CMOS 平板探测器，具有实时影像增强功能且使用寿命长。几何放大倍率达 1400 倍，系统放大倍率 4200 倍。最大样品检测尺寸为 29”x 22.8”（736 x 580 mm），在保持放大倍率不变的情况下，最大可达到 70 度倾斜角检测。具备自动检测功能，操作简便，通过软件点击即可完成，无需编程技巧 。
Product Name: Nordson NORDSON XD7500 - 1 X - ray Inspection SystemUsage: It is mainly used in the electronics manufacturing field for non - destructive inspection of printed circuit board (PCB) components and electronic components. It can accurately detect solder joint defects (such as cold solder joints, short circuits, and open circuits), abnormal internal structures of components, position deviations, etc., helping to improve product quality and production efficiency.Technical Principle: The system emits X - rays to penetrate the object to be inspected. Due to the different absorption degrees of X - rays by different materials, the intensity distribution of X - rays passing through the object varies. The detector receives these X - rays and converts them into electrical signals, which are then processed to generate an image. By analyzing the image, it can identify whether there are defects and abnormalities in the product.Performance: Equipped with Nordson DAGE open, transmissive X - ray tube, with a feature resolution of < 0.95μm at a maximum tube voltage of 160 KV and a target power of 3W. It uses a 1.33 - megapixel, 10 - frame - per - second CMOS flat - panel detector with real - time image enhancement function and long service life. The geometric magnification is 1400 times, and the system magnification is 4200 times. The maximum sample detection size is 29”x 22.8” (736 x 580 mm), and the maximum tilt angle for detection can reach 70 degrees while maintaining the magnification. It has an automatic detection function, which is easy to operate and can be completed by clicking on the software without programming skills.