诺信 NORDSON XD7500 - NT X 射线检测系统用途：适用于电子制造领域，特别是印刷电路板（PCB）组件及半导体元件的检测。可精准检测焊点缺陷、元件内部结构异常、位置偏移等问题，助力提升产品质量与生产效率。技术原理：通过发射 X 射线穿透被检测物体，不同材料对 X 射线吸收程度有别，导致透过物体的 X 射线强度分布不同。探测器接收 X 射线并转化为电信号，经处理生成图像，以此分析物体内部状况，实现无损检测。性能：配备 Nordson DAGE NT 免维护、封闭穿透式 X 光管，电压 30 - 160 kV。在功率小于 4W 时，特征识别可达 <0.95μm；电压 110kV 以上，功率可达 10W 。采用 133 万像素、10 帧 / 秒的 CMOS 平板探测器，具备实时影像增强功能。几何放大倍率达 1400 倍，系统放大倍率 4200 倍。最大样品检测尺寸为 29”x 22.8”（736 x 580 mm），最大可实现 70 度倾斜角检测，能 360 度旋转检测测试点。操作简便，通过软件点击即可完成，无需编程技巧 。
Product Name: Nordson NORDSON XD7500 - NT X - ray Inspection SystemUsage: It is suitable for the electronics manufacturing field, especially for the inspection of printed circuit board (PCB) components and semiconductor elements. It can accurately detect solder joint defects, abnormal internal structures of components, position deviations, etc., helping to improve product quality and production efficiency.Technical Principle: By emitting X - rays to penetrate the object to be inspected, different materials have different absorption degrees of X - rays, resulting in different intensity distributions of X - rays passing through the object. The detector receives the X - rays and converts them into electrical signals, which are then processed to generate an image, so as to analyze the internal condition of the object and achieve non - destructive testing.Performance: Equipped with Nordson DAGE NT maintenance - free, sealed transmissive X - ray tube, with a voltage range of 30 - 160 kV. When the power is less than 4W, the feature recognition can reach < 0.95μm; when the voltage is above 110kV, the power can reach 10W. It uses a 1.33 - megapixel, 10 - frame - per - second CMOS flat - panel detector with real - time image enhancement function. The geometric magnification is 1400 times, and the system magnification is 4200 times. The maximum sample detection size is 29”x 22.8” (736 x 580 mm), and the maximum tilt angle for detection can reach 70 degrees. It can perform 360 - degree rotation detection of test points. It is easy to operate and can be completed by clicking on the software without programming skills.